Barko 830B, Service Manual

Page: 206 / 218

65-24
®
SERVICE- IWT / WFB WHEEL & TIRE
WARNING
!
CAUTION
!
CAUTION
!
NOTICE
NOTICE
LUG
BOLTS
Improperly inflated tires can cause
excessive heat build-up resulting in
blowouts.
Always keep tires inflated to the
proper pressure. Unexpected blowouts may
cause injury or death.
BARKO P/N Model Barko Application
BARKO Machine Applications for IWT / WFB TIRES:
Ÿ
537-00704 28L-26 830, 930, 937
Ÿ
535-00002 67x34-26 830, 930, 937
Over or under inflated tires can cause a
drastic reduction in tire and rim life.
Keep the valve caps on to prevent dirt
from entering the valves. Dirt will cause
valve damage.
1. TIRE INSPECTION & SERVICE
Ÿ
28L-26 Tires 30 PSI
Daily Maintenance:
Tire pressure may vary slightly depending upon the application of the
machine (saw head, mulcher head...).
Ÿ
(tubeless) 50 PSI 67x34-26 Tires
Tire Inflation Pressure:
As a general guide the following is suggested:
Ÿ
Visually inspect the tires for proper inflation, and for cuts, gouges, blisters or tread separation.
Ÿ
Check the tire pressure. Make sure all tires are properly inflated.
2. WHEEL LUG TORQUE (Fig-1)
Fig-1
See your BARKO Parts Manual for
replacement wheel lug fasteners.
Bolts are shown in this illustration.
Apply ANTI-SEIZE to fastener threads.
Thread Size Torque
3/4”-10 Gr9 310 ft-lbs (420 N-m)
06/05/2019
Updated
SERVICE