Barko 830B, Service Manual

Page: 180 / 218

60-46 ®
SERVICE- SERIES 45 HYD PUMP
(continued...)
13.
14.
15.
12.
11.
Install the manifold assembly onto the control housing using four screws (C151) . Torque the screws
to
6.4 N•m [4.7 lbf•ft]
. Torque the screws in a criss-cross pattern and re-torque the first screw to
ensure proper torque retention.
Install the control assembly onto the endcap using the four screws (C300) . Torque the screws to
6.4 N•m [4.7 lbf•ft]
. Torque screws in a criss-cross pattern and re-torque the first screw to ensure
proper torque retention.
Check and adjust the control setting. See Chapter 20 Hydraulics in this manual for pump settings.
Using petroleum jelly to retain them, install the four interface O-rings (C200) in the recesses on the
control housing.
Using petroleum jelly to retain them, install the two interface O-rings (C154) in the recesses on the
electric control manifold.
06/05/2019
Updated
SERVICE