User Manual “Streaming Client“ - V1.31 - 8. Jan. 2007
BOOTP,
DHCP
,
IPzator
, AutoIP)
To enable automatic discovery but disable certain IP
discovery functions set all but the third value to zero.
For each function you want to disable add the value from
the table below:
•
“0.0.1.0” to disable AutoIP
•
“0.0.2.0” to disable DHCP
•
“0.0.4.0” to disable BOOTP
•
“0.0.8.0” to disable IPzator
Examples:
•
“0.0.3.0” disables AutoIP and DHCP
•
“0.0.11.0” disables all but BOOTP
Attention
: “0.0.15.0” disables all discovery functions
which locks you out unless you reset the device to
factory defaults by pressing the reset button for about 10
seconds.
Netmask
Enter the 4 values of the desired
Netmask
e.g.:
•
“0.0.0.0” for a default Netmask depending on the IP
Address used
•
“255.255.255.0” for a C class network
Note
: Try first the Netmask your PC is set to or ask
your Network Administrator.
Gateway IP Address
A correct setting of the Gateway IP address is needed to
connect to streams from the Internet or from outside
your local network (LAN).
Enter the 4 values of the desired Gateway IP address e.g.:
•
"0.0.0.0" for no Gateway or automatic discovery
•
"192.168.0.1" for a Gateway in a LAN
Device Configuration
15
