BARIX Streaming Client User Manual Download Page 8

Page: 8 / 51

User Manual “Streaming Client“ - V1.31 - 8. Jan. 2007

•

Supports automatic remote update of settings,

configuration and firmware

•

Monitoring using SNMP and MTELL (HTTP, UDP)

•

Supports the Barix IR Remote Control

•

Automatic network configuration (BOOTP, DHCP,

AutoIP and IPzator) as well as manual static IP

configuration

•

Features SonicIP ® announcing the IP address on

power up over the audio outputs

•

Supports proxy server (HTTP proxy support)

•

Autoplay functions plays all audio files without playlist

(standalone mode)

These features are not available for legacy devices

(Exstreamer, Exstreamer Wireless, Exstreamer Digital

and Exstreamer Gold) as the USB port is missing.

1.3 Installing the device

For the installation of the Barix Exstreamer 100 or the

Barix Exstreamer 200 please refer to the corresponding

“Quick Install Guide”.

A printed version is included in the box and can also be

downloaded from our site

www.barix.com

For the installation of the Barix IP Audio Module or the

Barix IP Audio Module 200 please refer to the

corresponding “Development Specification” which can be

downloaded from our site

www.barix.com

1.4 Additional documents

Technical specifications can be found in the

corresponding product sheet which can be downloaded

from our site

www.barix.com

Introduction

Summary of Contents for Streaming Client




















































Search results

Summary of Contents for Streaming Client

Reviews:

Related manuals for Streaming Client

Brands by name

Popular brands

BARIX Streaming Client, User Manual

Search results

Summary of Contents for Streaming Client

Reviews:

Related manuals for Streaming Client

Brands by name

Popular brands