BARIX Streaming Client User Manual Download Page 50

Page: 50 / 51

User Manual “Streaming Client“ - V1.31 - 8. Jan. 2007

SonicIP

Barix SonicIP® technology is designed to vocally

announce the Barix devices current IP address. This

makes it easier and faster to obtain the necessary

network information. To make use of SonicIP plug in the

included earphone into RCA audio out, connect the

network and plug in the power supply. It will announce

the address over the earphones right after power up.

Static IP

A Static IP is a fixed IP address that you assign manually
to a device on the network. It remains valid until you

disable it.

Telnet

Telnet is a user command and an underlying TCP/IP

protocol for accessing remote computers. On the Web,

HTTP and FTP protocols allow you to request specific

files from remote computers, but not to actually be

logged on as a user of that computer. With Telnet, you

log on as a regular user with whatever privileges you may

have been granted to the specific application and data on

that computer. Example: telnet 192.168.2.10

Dictionary

Summary of Contents for Streaming Client




















































Search results

Summary of Contents for Streaming Client

Reviews:

Related manuals for Streaming Client

Brands by name

Popular brands

BARIX Streaming Client, User Manual

Search results

Summary of Contents for Streaming Client

Reviews:

Related manuals for Streaming Client

Brands by name

Popular brands