background image

 

 

 

Air 

24 

Air 

 

 

 

Counterhold! 

 

14 

 

35 

34 

 

 

157 

156 

120 

138 

33 

 

14 

28 

 

 

 

 

Air 

24 

Air 

 

 

 

Counterhold! 

 

14 

 

35 

34 

 

 

157 

156 

120 

138 

33 

 

14 

28 

 

24

33

1

2

14

14

28

120

50

157

156

9

35

34

276

17

277

277

17

276

2

24

17

(GB-IST-BBZO-0413) 18/24

The Company BARDIANI VALVOLE reserves the right to modify its products at any time without prior notice.

13. Disassembly of BBZOG / BBZOH

2.

 Remove clamp (33) and body (1).

1.

 Fix the guide bushing (17) 

through 2 screw M6x10 and sup-

ply air to fitting (24).

3.

 Release air pressure to air fitting (24).

6. P.T.F.E. SHUTTER:

Unscrew shutter nut (28) and remove 

shutter ring (14).

5.

 Remove shutter ring (14) to 

the shutter (2).

Countherhold!

4.

 Unscrew shutter (2). 

Counterhold the pivot with an 

Allen wrench.

7.

 Remove from the cylinder 

(9) the cap (50). Remove 

,from the same , gaskets 

(156 e 157) and the guide 

bushing (120). 

8.

 Remove screws (34) and 

assembly (35)

.

9. 

Remove screws M6x10 and guide bushing from 

the cylinder (17) with a suitable tool. Remove 

seal rings (277 e 276).

Air

Summary of Contents for BBZO BBZOG

























Reviews: