background image

CONTENTS

Section 1

Rating Plate Information .............................................. 1

Section 2

Important Safety Precautions ...................................... 1

Section 3

Understanding How Your Furnace and
Air Conditioner Works ................................................. 3

Section 4

Turning Off Furnace in an Emergency ......................... 4

Section 5

Operating Your Furnace .............................................. 8

Section 6

Proper Maintenance of Your Furnace
and Air Conditioner ...................................................... 8

Section 7

Air Conditioning Start Up Procedure
Crankcase Heater ...................................................... 12

Section 8

Ventilation Options ..................................................... 12

Section 9

Replacement Parts .................................................... 13

Section 10

Outdoor Coil .............................................................. 13

Figures

Figure 1

Typical Gas Piping ..................................... 6

Figure 2

Step-by-Step Instructions
on Lighting Burners .................................... 9

Figure 3

Filter Locations .......................................  11

Figure 4

Location of Access Panels .....................  11

Figure 5

Start Up Procedures ................................ 12

COPYRIGHT JULY 2000

BARD MANUFACTURING COMPANY

BRYAN, OHIO  USA  43506

Manufactured under the following U.S Patent Numbers:

5,485,878;   5,022,116;   4,924,934;    4,875,520;

4,825,936;   4,432,409

Summary of Contents for WG-Series
















Reviews: