manualshive.com logo in svg

Bard LV1000-100, Installation Support Materials, Page: 36 / 36

Share
Download
Bard LV1000-100 Installation Support Materials Download Page 36

ADDITIONAL PROGRAMMING

LV1000 Menus/Screens

Main Menu

Press the MENU key from any screen to return to the 
Main Menu. Press the UP or DOWN keys to scroll 
through the available menus. When the desired menu 
is highlighted, press the ENTER key to access that 
menu. Press the ESCAPE key or MENU key to return to 
the Status screen from the Main Menu.

Status Screen

The Status screen is the default start-up screen and 
also the return screen after 5 minutes of no activity. 
The screen can be accessed any time by pressing the 
ESCAPE key repeatedly. The LV1000 Status screen 
displays the current date, time, unit displayed, zone 
and unit status.

Quick Menu

The Quick Menu is available on the Status screen. Use 
UP or DOWN keys while on the Status screen to scroll 
between the three Quick Menu options; press ENTER 
key.

Data Log

The data log displays the record number, time of alarm 
event, date of alarm event, description of alarm event 
and whether the entry is the beginning or end of event. 
The data log will have as many screens as events 
occurred.

Info

Info displays wall unit status for each wall-mount unit 
connected to controller, last hour tracking (shelter), last 
hour tracking (for each wall-mount unit connected, last 
hour averages (zone temperatures, OA temperature and 
OA humidity) and additional LV1000 information.

Setpoints

Setpoints allows setting and enabling of comfort mode.

Changing to Celsius

1.  Press MENU key to go to the Main Menu screen.
2.  Use UP or DOWN keys and ENTER key to enter 

USER password 2000.

3.  Press UP or DOWN keys to scroll to 

Sys Config

; 

press ENTER key.

4.  Press UP or DOWN keys to scroll to 

Unit Setup 

(A1)

.

5.  Press ENTER key to scroll to 

UOM

.

6.  Press UP and DOWN keys to change value to 

SI

. 

Calibrating Sensors

1.  Press MENU key to go to the Main Menu screen.
2.  Use UP or DOWN keys and ENTER key to enter 

USER password 2000.

3.  Press UP or DOWN keys to scroll to 

I/O Config

; 

press ENTER key.

4.  Press UP or DOWN keys to scroll to sensor to be 

adjusted.

5.   Press ENTER key to scroll to 

Offset

.

6.  Press UP or DOWN keys to add or subtract to the 

sensor offset value.

7.  Press ENTER key to save.

 

Page 

36 of 36

Summary of Contents for LV1000-100





































Reviews:

No comments