Barco SLite Series, Installation Manual

Page: 12 / 41

2. System overview
1. Weight tolerances.
2. Ceiling heights (floor or suspended).
3. Ballast loads (for base stand assemblies).
4. Front or rear clearances.
5. Stacking limitations.
6. Environmental conditions.
7. Location.
8. Ground clearances.
9. Ground stability.
10. Local regulations regarding such installations.
Individual basis
Support structures must be assessed on an individual basis. Never construct a wall if there is uncertainty regarding the stability of
an installation or the load holding capabilities. If there are doubts on a system’s viability, consult Barco for advise on professional
rigging organizations.
Example of a support structure
Image 2-2
The support structure in the above example is pure illustrative for a H7 x V5 SLite display. Several variants of
support structures are possible for the same size of a SLite display. Contact Barco NV. for more information.
8 R5976575 FIXED SLITE DISPLAY 17102003