Barco SIM 7QP HB, User Manual

Page: 32 / 206

4. Installation
4.7.2 Signal connections
Overview
• Input section
• Input speci fi cations
• Connecting a DVI source
• Connecting an RGB source
4.7.2.1 Input section
Overview
The input section consists of 2 input layers and a communication layer:
• input layer 1: twin dual link DVI input
• input layer 2: analog input consisting of a 5 BNC RGBHV input, a composite video input (not supported) and a S-Video input
(not supported)
• communication layer: RJ45 (LAN1). This Ethernet input is connected to the image processor (PMP or Pixel Map Processor).
Image 4-32
Input section
4.7.2.2 Input speci fi cations
DVI input board
This board includes two DVI dual link digital inputs. These inputs can be used separately, or they can be used as a Twin Dual DVI
input to receive a high bit depth signal (e.g. 16 bit).
DVI 1 DVI 2
Image 4-33
Dual DVI input
Video input board
The video input board holds an RGBHV input. By default, the composite video (BNC connector) and the S-video input (mini-DIN
connector) are not supported.
R / PR G / Y B / PB Hs / Cs Vs VIDEO S-VIDEO
Image 4-34
Video input board
4.7.2.3 Connecting a DVI source
How to connect two single channel DVI sources ?
1. Connect each source to the projector by connecting the DVI male connector of channel 1 into the projector’s DVI 1 female input
connector and the DVI male connector of channel 2 in the DVI 2 female input connector
28 R59770330 SIM 7QP SERIES 08/12/2014