RLM W14 08/20/2014
57
11.Alignment
11.8 Lens Memory
There are three functions available after adjusting zoom, focus and lens shift position.
Save Memory
it is used to store current zoom, focus, and lens shift position settings into the designated memory among 3 memories. Users
can repeat the above procedure to store up to 3 lens memories.
Load Memory
it is used to recall the previously stored memory from among 3 memories.
Clear Memory
it is used to clear the previously saved settings per the designated memory.
11.10 Keystone
Horizontal Keystone & Vertical Keystone
Use this function to correct keystoning caused by projection angle.
—>
—>
The summation of the absolute value of horizontal keystone and vertical keystone is limited to less than or
equal to 350°.
11.11 Dynamic Contrast
Use this function to configure the projector to automatically adjust image contrast from the source upon start up or shut
down. When activated, the projector will dynamically adjust the image contrast from the beginning of the projection until the
content has ended.
