RLM W14 08/20/2014
16
3.Physical Installation
2. Follow below image to install the lens.
Carefully align the connectors
while installing the lens.
Don’t forget to attach the
hook at the lensholder
Click
How to remove the lens
1. Follow the drawing to press the button
2. Press down the lever to release the lens
3. Pull out the lens.
Make sure to hold the lens lever fully when install the lens (or remove the lens)
C
AUTION
: Never transport the projector with a Lens mounted in the Lens Holder. Always remove the Lens
before transporting the projector. Neglecting this can damage the Lens Holder and Prism.
It’s recommended to place the Lens caps of the original Lens packaging, back on both sides of the
removed Lens to protect the optics of the Lens.
Lens focus
Press the button
on the remote control or
MENU
on the projector panel, Choose OSD -> LENS FOCUS , then use the
buttons to adjust the lens' focus (clarity).
—>
