RLM W14 08/20/2014
15
3.Physical Installation
3.2 Lenses
Available lenses for the RLM W14 projector projector
•
R9862000-TLD+ (0.73:1)
•
R9840775-TLD+ (1.2:1)
•
R9862010-TLD+ (1.5 - 2.0:1)
•
R9862020-TLD+ (2.0 - 2.8:1)
•
R9862030-TLD+ (2.8 - 4.5:1)
•
R9862040-TLD+ (4.5 - 7:5:1)
•
R9829997-TLD+ (7.5 - 11.2)
•
R9862005-TLD+ Ultra (1.25-1.6)
Projection lenses are optional accessories. Please contact your local dealer to acquire the projection lens
that suits your need most.
How to install the lens
1. Install the lens safety Cable.
When using the safety cable ?
The lens safety cable must be used in any circumstances to protect a mounted lens in the lens holder.
How to mount the cable
A. Put the safety cable around the lens. Make sure the cable is mounted between the motor part and the mounting flange
B. Insert both cable sides into the clamp;
trap the cable and make sure that the clamp is positioned on 45° from the bottom to avoid interference of the cable with
the lens locking mechanism. Secure the cable by fixating the nut of the clamp.
C. Turn the cable with hook lock around the eye near the lens holder and lock it.
A
B
C
C