Barco R9851620, Installation Manual

Page: 18 / 37

3. Replacing a bad LED from an ILite LED board
3.3 Removing the power assembly
The power unit and fan mounted upon the power support plate forms the power assembly. Before you can
remove the power assembly, you have to remove the cover from the ILite tile first.
Necessary tools
• Torx T20.
• 7 mm nut driver.
How to remove the power assembly from the ILite tile ?
1. Release the eight screws (P) which attach the power assembly (I) to the rest of the ILite tile (F). Three screws on the power
supply unit, one above the fan, two left on the support plate and two right on the support plate.
P
I
F
Image 3-2
2. Remove the power assembly out of the ILite tile.
Caution: Be careful with the board to board connectors between the power unit and the controller unit underneath.
14 R5976460 ILITE LED REPLACEMENT KIT 29/03/2007