Barco R9851620, Installation Manual

Page: 17 / 37

3. Replacing a bad LED from an ILite LED board
3.2 Removing the cover
It’s not necessary to remove the re-sync unit first. The re-sync unit is attached to the cover and comes off
with the cover.
Necessary tools
• Torx T20.
• 7 mm nut driver.
How to remove the cover ?
1. Release the six screws (P) of the ILite cover (L), one in each corner and one under each handle.
P
F
L
Image 3-1
2. Remove the cover from the rest of the tile (L).
R5976460 ILITE LED REPLACEMENT KIT 29/03/2007 13