BARCO 6
Daylight Display Systems
IMPORTANT all plug holder clamps must be locked firmly on the back of AEC units
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
IMPORTANT, plug holder clamps must be locked firmly on all AEC units to prevent the possible ingress of
fluids or solid particles. Replace damaged clamps or seals immediately.
Do NOT submerge fully or partly in water or other liquids.
Clean only with materials or chemicals that are inert, nonabrasive, noncorrosive and non-marking. Consult
the manufacturer for further advice should any doubts exist regarding any cleaning procedure.
Do not block ventilation openings. Install in accordance with the manufacturers instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding type plugs/sockets. If the provided sockets/
plugs are damaged then replacement of the defective parts must be undertaken immediately.
Protect the power/data cords from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus. Replace damaged power/data cords immediately.
Only use attachments/accessories specified by the manufacturer.
Disconnect the power to this apparatus during lightning storms or provide suitable additional lightning
protection. Unplug this apparatus when unused for long period of time.
Refer all servicing to qualified service technicians/personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, the apparatus does not operate
normally, or has been dropped.
Use only with systems or peripherals specified by the manufacturer, or sold with the apparatus. Use caution
during lifting/moving or transporting to avoid damage by possible tipping.
Additional Safety Notice
IMPORTANT
WARNINGS
