BARCO 18
Daylight Display Systems
Necessary Tools
DLite Software
AEC Sensing
Sensing
To perform sensing, follow the next procedure:
continued on next page
What has to be
done
Use this feature to set the frequency at which reading are taken from the AEC(s)
1
2
3
1
2
Open the DLite System Monitor Properties window, by
clicking with the right mouse button on the DLite taskbar in
the windows taskbar.
Check the AEC sensing in the Monitor Properties tab.
Set the polling interval and whether a continuous check or
specified interval is required.
Select the AEC Sensing tab, a window appears.
Here the Reaction Slope can be set . This function
decides how fast the display will react to the measurements
of the AECs. The value is between 0.1 and 1.0, the higher
the value the faster the response time.
The minimum and maximum light output of the display may
be set in this window.
Step
Action
Image
Image 1 Monitor
properties
