Barco R9850100, Installation Manual

Page: 14 / 19

BARCO ——————————————————— 14 —————————— Daylight Display Systems
Addressing
What has to be
done
An AEC is addressed the same way as a tile. Once the complete DLite Display is set up
one can address this Display with the DLite Software. The software will address the tiles
and all connected AEC’s.
Necessary Tools DLite Software
continued on next page
Addressing Follow the next procedure:
Image 1 Main
window
Step Action Image
1
2
3
4
1,2
2
2
The addresses of the AEC’s will start after the address of
the last tile depending on other devices connected to the
display and the number of AEC’s. A “Ambient Controller”
button will appear in the Main Window. Click on this button.
In the “Device Listing” you will find all the connected AEC’s
with their addresses. The number next to >> is the
weighting importance, given to that AEC.
The weighting of the AEC’s is also displayed in the
“Resource Sharing” window. The weights are given as a pie
representation.
Select the AEC* and press the up or down button on the
right of the pie chart. The weighting net to the selected AEC
changes accordingly.
In “General Info” you will find the address, serial number,
software version and run time of the selected AEC.