![background image](http://html1.mh-extra.com/html/barco/r9841020-cine-versum-master/r9841020-cine-versum-master_installation-manual_4236570109.webp)
17. Adjusting the Picture
17. ADJUSTING THE PICTURE
Overview
•
Setup Video and RGB module for the input signal type
•
Adjusting the Image Orientation
•
Adjusting the Image Aspect Ratio
•
Adjusting the Decoding Standard
•
•
•
Adjusting the Image Shift and Size
•
Outline the displayed Image (Blanking)
•
Alignment of the Input Balance
•
Phase adjustment for Computer signals
•
•
Adjusting the Color Temperature
•
Adjusting the Picture Controls
17.1 Setup Video and RGB module for the input signal type
Introduction
After the signal sources have been connected to the respective modules, the input signal type of the Video and RGB module has to
be setup.
Module
Signal Type 1
Signal Type 2
Signal Type 3
Video
Composite Video
YUV (standard)
S-Video
RGB-YUV
RGB
YUV (progressive)
How to setup the input mode
1. Press the jog dial on the Master or the
ADJ
key on the Remote Control.
The Main menu appears on-screen and in the graphical display. (menu 17-1)
2. Select item INSTALLATION by rotating the jog dial on the Master or the up/down arrow keys on the Remote Control (menu 17-1).
3. Press the jog dial on the Master or the key
ENTER
on the Remote Control to confirm.
The sub menu INSTALLATION appears on-screen and in the graphical display. (menu 17-2)
4. Select item INPUT SLOTS by rotating the jog dial on the Master or the up/down arrow keys on the Remote Control (see menus
in step 1).
5. Press the jog dial on the Master or the key
ENTER
on the Remote Control to confirm.
The Input slots menu appears on-screen and in the graphical display showing the kind of inserted module in the respective slots,
and for the Video and the RGB module the signal type setup placed between brackets. (menu 17-3)
6. Select, by rotating the jog dial on the Master or the up/down arrow keys on the Remote Control, the Input slot you desire to
change the signal input setting (see menus in step 3).
7. Toggle by pressing the jog dial on the Master or the
ENTER
key on the Remote Control until the correct input type appears
between brackets.
R5976468 CINE VERSUM SYSTEM 03112003
105
Summary of Contents for R9841020 Cine VERSUM Master
