![background image](http://html1.mh-extra.com/html/barco/r9841020-cine-versum-master/r9841020-cine-versum-master_installation-manual_4236570126.webp)
17. Adjusting the Picture
6. Proceed to the X-Y adjustment, using the Remote Control:
- Select a coordinate to be modified by pressing the
↑
or
↓
key on the Remote Control and press
ENTER
to confirm.
- A new sub menu opens allowing to adjust, by pressing the
↑
or
↓
keys the Y-value and by pressing
←
or
→
keys the X-value.
- Press
EXIT
to return.
7. Press
EXIT
on the Remote Control or select item
BACK
in the menus to return.
Color Temperature
*Display White
Computer__9300K
Video_____6500K
Film______5400K
Broadcast_3200K
Custom Balance
Back
Menu 17-27
Display White
Computer 9300K Video 6500K
Film 5400K
255
Broadcast 3200K
White X: 0.316
White Y: 0.332
White X: 0.283
White Y: 0.297
White X: 0.313
White Y: 0.329
White X: 0.335
White Y: 0.349
White X: 0.423
White Y: 0.399
Image 17-15
17.13Adjusting the Picture Controls
About picture controls
Picture controls as, Brightness, Contrast, Saturation and Tint can be remotely controlled using the Remote control (refer to the
Owner’s manual). The same functions are also available in the GUI, displayed on-screen and in the graphical display on the Master.
The three analog controls can be adjusted for all the linked displays at the same time (=Master), on the other hand, corrections can
be applied for each display separately (=Display), depending the environment conditions.
Menu overview picture controls
CineVERSUM
Image settings
Advanced Settings
Installation
Service
1 NO MODULE
2 NO MODULE
3 VIDEO [VIDEO]
4 NO MODULE
5 NO MODULE
6 NO MODULE
7 RGB-YUV [RGB]
8 NO MODULE
Shut Down
Back
Main Menu
Image Settings
Address Display
Address Master
Display List
1 Plasma
On
2 CV80
On
3 CV120
On
Back
Image Settings
Master
Brightness
Contrast
Saturation
Display
Back
Image Settings
Display
Brightness
Contrast
Gamma
Color Temperature
Master
Back
Image Settings
Display
Brightness
Contrast
Gamma
Color Temperature
Primaries:[Projector]
White peak: [OFF]
Master
Back
Image Settings
Display
Brightness
Contrast
Gamma
Color Temperature
Primaries:[Projector]
Lamp mode:[Single]
Lamp Power:[Normal]
Master
Back
Plasma
CV80
CV120
If one Display only
Cine VERSUM r01
Example of a display list
Image 17-16
122
R5976468 CINE VERSUM SYSTEM 03112003
Summary of Contents for R9841020 Cine VERSUM Master
