Barco R9841020 Cine VERSUM Master, Installation Manual

Page: 111 / 161

17. Adjusting the Picture
8. Select the Orientation item which suit the projector mounting by rotating the jog dial on the Master or the up/down arrow keys on
the Remote Control.
9. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm.
The projector fits to the selected image orientation and the system returns to operation automatically after a few seconds. (im-
age 17-1)
Installation
Input slots
File service
Display list
Internal pattern
When no signal
Source transition
OSD Configuration
Language
Keystone
Global keystone: Yes
Output: [Largest]
Default input balance
Back
Menu 17-4
Display List
2 CV50 1: On
3 CV50 2: Off (Stdby)
4 CV80 1: On
5 CV120 1: Off (Stdby)
6 CV80 2: On
Back
Menu 17-5
Display settings
Switch OFF
Display Info
Rename
Update Software
IR address: 9
CW Index
Orientation
Projector_mode
Back
Menu 17-6
Orientation
Front/Table
Rear/Table
Front/Ceiling
Rear/Ceiling
Back
Menu 17-7
Image 17-1
Image orientation adjustment
17.3 Adjusting the Image Aspect Ratio
How to adjust the image Aspect Ratio
This function allows you to modify or customize the image display mode to enhance the input image.
1. Press the jog dial on the Master or the
ADJ key on the Remote Control.
The Main menu appears on-screen and in the graphical display. (menu 17-8)
2. Select item ADVANCED SETTINGS by rotating the jog dial on the Master or the up/down arrow keys on the Remote Control
(menu 17-8).
3. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm.
The sub menu ADVANCED SETTINGS appears on-screen and in the graphical display. (menu 17-9)
4. Select item ASPECT RATIO by rotating the jog dial on the Master or the up/down arrow keys on the Remote Control.
R5976468 CINE VERSUM SYSTEM 03112003 107