Barco R9806700, Installation Manual

Page: 55 / 105

13. Input Source File Service
13. INPUT SOURCE FILE SERVICE
Overview
• About Stored Files
• Loading a File
• File identification
• Editing a File
• Changing the parameter settings
• Rename a file
• Copy a File
• Delete a File from file list
• File Options (Sort and Load)
13.1 About Stored Files
ACSAR memory
The ACSAR memory contains a list of files corresponding to the most used sources. When the ACSAR starts up (with active con-
nected sources to the input modules), the input signals are scanned and compared with an already stored file. Mostly the result is
a new custom file (linked to the input slot and e.g. differences in adjustments) for that input signal which is stored in the memory of
the ACSAR. If the automatic created file needs small corrections, the Edit file option allows to adjust the file.
If no stored file corresponds to the specs of the scanned input signal, a most corresponding file can be loaded for that input signal
and then further edited to match the specs of the input signal.
How a file is coded
The stored file name includes 5 parts, e.g. bbbbbbbb.eee n ppppxppppi
Part name Description
bbbbbbbb Base name of the file (8 characters) e.g. vid625_c02
eee
File extension including:
first character = C: custom made file
first character = S: standard file
second and third character: serial number (=file index) e.g. 05
n
Input slot number e.g. 3
ppppxpppp
Active pixel format e.g. 692x285
i blank: non interlaced file
i: interlaced file
R5976519 ACSAR 12122002 51