Barco R9040171, Owner'S Manual

Page: 74 / 95

11. Installation menu
Image 11-2 Image 11-3
A vertical shift above 100% is not recomended in case of high resolution data signals.
11.2 Projector address
What can be done ?
In some cases the projector address must be changed, for example if an unique RCU is used to control 2 or more projectors.
The projector address setting on the projector must match the setting on the RCU.
What can be changed ?
Within the ’Change Projector Address’ menu, the following items can be changed
• Projector address: address defined by the user, may be from 0 to 255
• Common address : address may be 0 or 1
How to change the projector’s RC5 address ?
1. Press MENU to activate the Toolbar
2. Press
→
to select the Installation
3. Press
↓
to Pull down the Installation menu
4. Use
↑
or
↓
to select Projector address (image 11-4)
5. Press ENTER
A dialogbox appears on the screen. (image 11-5, image 11-6)
Image 11-4
Image 11-5 Image 11-6
70 R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002