Barco R9040171, Owner'S Manual

Page: 54 / 95

7. Image Menu
Image 7-12
7.7 Filmmode detection
What can be done ?
Some sources like common DVD material are derived from cinema 24 Hz sources (2/2 or 3/2 pull down method).
The filmmode detection insures that these converted signals are shown without artefacts.
This function may cause undesired effects on standard sources, therefore it can be disabled (OFF) at any time
Enabling/disabling the filmmode detection
1. Press MENU to activate the Toolbar
2. Press
→
to select the Image item
3. Press
↓
to Pull down the Image menu
4. Use
↑
or
↓
to select Filmmode detection
5. Press
→
to pull down the menu
6. Use
↓
or
↑
to enable or disable the Filmmode detection
7. Press ENTER
A white bullet shows the active setting (image 7-13)
Image 7-13
50 R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002