Barco R9040171, Owner'S Manual

Page: 65 / 95

9. Signal Menu
9. SIGNAL MENU
Overview
• Switching mode
• Background
9.1 Switching mode
Switching from one source to another
To minimize undesired effects when switching from one source to another, one can use the Seamless switching mode, beside Seam-
less switching there is a wide choice of several effects which render the source switching transitions more enjoyable.
How to select a switching mode ?
1. Press MENU to activate the Toolbar
2. Press
→
to select the Signal item
3. Press
↓
to Pull down the Signal menu
4. Use
↑
or
↓
to select Switching mode
5. Press
→
to pull down the menu
6. Use
↑
or
↓
to select the desired switching mode (image 9-1)
7. Press ENTER
A white bullet shows the active effect.
The next source switching will be done using the selected effect
Image 9-1
9.2 Background
Purpose
If there is no signal connected to the projector, the background will be a logo, a black or a blue screen depending on the background
settings.
R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002 61