![background image](http://html1.mh-extra.com/html/barco/r9004460/r9004460_owners-manual_4265878103.webp)
8. Service
8. SERVICE
Overview
•
•
•
Change Projector Address – Common Address
•
•
•
•
•
•
•
8.1
Start up of the service menu
How to start up
1. Push the cursor key
↑
or
↓
to highlight
Service
2. Press
ENTER
to select.
The service menu will be displayed. (menu 8-2)
MAIN
Select a path from
below :
ADJUSTMENT MODE
INSTALLATION
SERVICE
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-1
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
BROADCAST MODE [OFF]
DIAGNOSIS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-2
8.2
Identification
What can be seen on the identification screen ?
The identification screen shows the general information of the projector.
The following items will be displayed:
•
Type of the projector.
•
Software version
•
Configuration, installation of the projector:
- front/ceiling
- front/table
- rear/ceiling
- rear/table
•
Baud rate : transfer speed for communication with a computer. The baud rate of the projector must be the same as the baud
rate of the connected computer. When there is a difference, consult ’Change Baudrate’ in this chapter.
•
Text, message and bar scales can be on or off.
•
Projector serial number : indicates the fabrication number of the projector. This number can be useful when calling for technical
assistance.
•
Projector run time : total time the projector is running since its first start up.
Start up
1. Push the cursor key
↑
or
↓
to highlight
Identification
R59770014 XLM HD30 07/07/2006
99
Summary of Contents for R9004460
