C-13
Barco Control Manager
5976183 BARCOREALITY 6500 31012001
Date & Time
The time and date can be set up (image 18).
To set up the time and date, handle as follow :
1 Select the time zone by clicking on the corresponding time zone in the Time zone list.
2 Select 'network time' by checking the network time box and fill out the IP-address of your local NTP server (network time protocol).
This server gives normally the GMT time, but due to time zone indication, the correct time will be filled out in the time and date text
box after Apply is click.
The 'Time' and 'Date' area will be grayed out but filled out with the correct time and date.
The current time on projector will be adapted.
or
3 Fill out the time and date text box with the following mask :
Time : hh:mm
Date : dd-mm-ccyy
The NTP server address box will be grayed out.
4 Click on Apply to activate.
The current time on projector will be adapted.
Remark :
Each time the projector is powered down, the date & time settings has be filled out again when chosen for the second methode.
image 18
Summary of Contents for R9001950
Page 28: ...4 12 Connections 5976183 BARCOGRAPHICS 6500 31012001...
Page 62: ...8 22 Random Access Adjustment Mode 5976183 BARCOGRAPHICS 6500 31012001...
Page 72: ...9 10 Installation Mode 5976183 BARCOGRAPHICS 6500 31012001...
Page 102: ...D 2 Cleaning the Dustfilter 5976183 BARCOGRAPHICS 6500 31012001...