6-1
Start up of the Adjustment Mode
5976183 BARCOGRAPHICS 6500 31012001
6
START UP OF THE ADJUSTMENT MODE
Adjustment Mode
Start Up
All source parameters, picture and audio tuning, and geometry are made while in the 'Adjustment Mode'. Press the
ADJUST
or
ENTER
key to enter the 'Adjustment mode'.
You are now in the 'Adjustment Mode'.
1 The cursor key (RCU) or '+ or '-' keys (local keypad) are used to make menu selections and also for adjustments.
2 The
ENTER
and
EXIT
keys are used to move forward and backward through the menu structure.
3 The
ADJUST
key can be used to terminate the adjustment mode while any path selection menu is displayed.
ADJUSTMENT MODE
Select a path from below :
AUTO IMAGE
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
ENTER PASSWORD
----
Use numeric keys
<EXIT> to return
PASSWORD
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
menu 1
Possible Paths
There are 4 possible paths to follow once in the Adjustment Mode. They are :
Auto Image
- Auto image will center the image on the LCD panel when a file is loaded.
Installation
- Installation should be selected if a new input module is installed or a new source is connected to an existing input module.
Also when the projector is relocated in a new configuration.
Random Access
- Random Access should be selected to set up a new source.
Service
- Service should be selected if the user intends to change general settings such as password, language, address, etc.or
some service actions as reset lamp run time, panel adjustments, etc. or get set-up information.
Password Protection
Some items in the Adjustment mode are password protected. While selecting such an item, the projector asks to enter your password
(Password protection is only available when the password strap on the controller module is ON, call an authorised service center
to change the position of the password strap).
Entering the Password
The password contains 4 digits.
Enter the digits with the numeric keys.
Example : 2 3 1 9
The first digit position is highlighted. Enter with the numeric keys. The highlighted square jumps to the next position. Continue until
all 4 digits are filled in.
Summary of Contents for R9001950
Page 28: ...4 12 Connections 5976183 BARCOGRAPHICS 6500 31012001...
Page 62: ...8 22 Random Access Adjustment Mode 5976183 BARCOGRAPHICS 6500 31012001...
Page 72: ...9 10 Installation Mode 5976183 BARCOGRAPHICS 6500 31012001...
Page 102: ...D 2 Cleaning the Dustfilter 5976183 BARCOGRAPHICS 6500 31012001...