Barco R9001500, Owner'S Manual

Page: 84 / 86

Service Mode
9-8 5976070 BARCOELM G10 18012000
Select with or
then <ENTER>
<EXIT> to return.
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
SERVICE
BARCO LOGO
PRESET INPUT BALANCE
I2C DIAGNOSIS
MORE...
I2C DIAGNOSIS
D C A
DECODER 12H # # #
MOTOR DRIVER 1AH # # #
LIGHT SENSOR 1CH # # #
LAMP DRIVER 20H # # #
LAMP DRIVER 22H # # #
POWER SUPPLY 30H # # #
INPUT SELECTOR 46H # # #
PMP INPUT SELECTOR 4AH # # #
INPUT SELECTOR 7EH # # #
LAMP MODULE A0H # # #
Scroll with
é
or
ê
<EXIT> to return.
I2C diagnosis.
What can be seen ?
Gives an overview of the correct working of the I²C controlled IC's.
How to start the I2C diagnosis ?
1 Push the cursor key é or ê to highlight 'I2C diagnosis' (menu 1).
2 Press ENTER to display.
menu 1
menu 1
SERVICE
BARCO LOGO
RESET INPUT BALANCE
I2C DIAGNOSIS
MORE...
WARNING
PRESET INPUT BALANCE
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
Available settings.
STATUS [ON/OFF]
ON : BARCO logo will be displayed on the screen.
OFF : No BARCO logo displayed on the screen.
BACKGROUND [ON/OFF]
ON : BARCO logo will be displayed on a black background.
OFF : BARCO logo will be displayed without any background.
SHIFT
By pushing the control disc up, down, to the left or to the right, the BARCO logo can be positioned anywhere on the screen.
HOT KEY [TEXT/OFF]
OFF : no key on the RCU is used to display the BARCO logo.
TEXT : the TEXT key on the RCU is used to display or to remove the BARCO logo with one single push on this key (only in
operational : mode).
Preset Input Balance
Warning
Changing these settings may seriously affect the performance of the projector.
How to start up ?
1 Push the cursor key é or ê to highlight 'Preset Input Balance' (menu 1).
2 Press ENTER to select.
When Preset Input Balance is selected in the Service Mode selection menu, the following warning will be displayed :
Preset Input Balance is reserved to qualified service personnel.
If you are not qualified, press EXIT to cancel the preset input balance.
menu 1
menu 2