Barco PGXG-61B, Safety Manual

Page: 5 / 46

5
PGXG-61B/PGWX-61B/PGWU-61B - - 2014/08/01
ENGLISH
Do not immerse or expose this projector in water or other liquids.
y
Do not spill liquid of any kind on this projector.
y
Should any liquid or solid object fall into the cabinet, unplug the set and have it checked by qualified service
y
personnel before resuming operations.
Do not disassemble this projector, always take it to an authorized trained service person when service or repair
y
work is required.
Do not use an accessory attachment which is not recommended by the manufacturer.
y
Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and
y
unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the device due to
lightning and AC power-line surges.
To prevent personal injury
Isolate electrically before replacing the lamp or lamp house. Caution: Hot lamp (house).
y
Caution: High pressure lamp may explode if improperly handled. Refer servicing to qualified service personnel.
y
To prevent injury and physical damage, always read this manual and all labels on the system before inserting
y
the lamp casing, connecting to the wall outlet or adjusting the projector.
To prevent injury, take note of the weight of the projector.
y
To prevent injury, ensure that the lens and all covers are correctly installed. See installation procedures.
y
Warning: high intensity light beam. NEVER look into the lens ! High luminance could result in damage to the
y
eye.
Warning: extremely high brightness lamps: This projector uses extremely high brightness lamps. Never attempt
y
to look directly into the lens or at the lamp. If the projection distance is less than 6 meter, any person needs to
be at least 4 meters away from the projected image. Avoid close range reflection of the projected image on any
reflecting surface (such as glass, metal, …) . When operating the projector, we strongly recommend wearing
suitable safety glasses.
Before attempting to remove any of the projector’s covers, you must turn off the projector and disconnect from
y
the wall outlet.
When required to switch off the projector, to access parts inside, always disconnect the power cord from the
y
power net.
The power input at the projector side is considered as the disconnect device. When required to switch off the
y
projector, to access parts inside, always disconnect the power cord at the projector side. In case the power input
at the projector side is not accessible (e.g. ceiling mount), the socket outlet supplying the projector shall be
installed nearby the projector and be easily accessible, or a readily accessible general disconnect device shall
be incorporated in the fixed wiring.
Do not place this equipment on an unstable cart, stand, or table. The product may fall, causing serious damage
y
to it and possible injury to the user.
It is hazardous to operate without lens or shield. Lenses, shields or ultra violet screens shall be changed if they
y
have become visibly damaged to such an extent that their effectiveness is impaired. For example by cracks or
deep scratches.
Warning: Protection from ultraviolet radiation: Do not look directly in the light beam. The lamp contained in this
y
product is an intense source of light and heat. One component of the light emitted from this lamp is ultraviolet
light. Potential eye and skin hazards are present when the lamp is energized due to ultraviolet radiation. Avoid
unnecessary exposure. Protect yourself and your employees by making them aware of the hazards and how
to protect themselves. Protecting the skin can be accomplished by wearing tightly woven garments and gloves.
Protecting the eyes from UV can be accomplished by wearing safety glasses that are designed to provide UV
protection. In addition to the UV, the visible light from the lamp is intense and should also be considered when
choosing protective eye wear.
Exposure to UV radiation: Some medications are known to make individuals extra sensitive to UV radiation. The
y
American Conference of Governmental Industrial Hygienists (ACGIH) recommends occupational UV exposure
for an-8 hour day to be less than 0,1 micro-watts per square centimeters of effective UV radiation. An evaluation
of the workplace is advised to assure employees are not exposed to cumulative radiation levels exceeding these
government guidelines. The exposer of this UV radiation is allowed for only 1 hour per day for maintenance and
service persons.
Mercury Vapor Warnings: Keep the following warnings in mind when using the projector. The lamp used in the
y
projector contains mercury. In case of a lamp rupture, explosion there will be a mercury vapor emission. In order
to minimize the potential risk of inhaling mercury vapors: - Ensure the projector is installed only in ventilated
rooms. - Replace the lamp module before the end of its operational life. - Promptly ventilate the room after a
lamp rupture, explosion has occurred, evacuate the room (particularly in case of a pregnant woman). - Seek