Barco OV-708, Installation Manual

Page: 62 / 78

Installation
Barco - OV-708/OV-713/OV-715– R59770137 – installation manual – revision 01– September 2007 ________________________________
________________________________ ________________________________ _______________________________________________ _______________ _______________ _______________ 57
5.22 Grounding
Step 74
Every support comes with a grounding kit which
consists of a ground ing wire (5m), the required
fixation material and the label.
The wire is mounted on every second column, to the
vertical profile, using the screw provided by the rear
vertical profile, just above the foot. Unscrew this
screw, apply the washer, the cable lug, the spring
washer, and insert the screw again.
(This screw replaces the fixation screw included in
the grounding kit).
Finally apply the label!
Please note:
Connection of the grounding wire to the power net of
the customer has to be d one by a qualified
electrician!
Barco only provides the connection to the display
wall!