Barco Njord, Installation Manual

Page: 20 / 232

R5913593 /01 Njord 20
2.1 Preparation process
Prepare for installation
1. Ensure that you understand all safety topics described in the chapter “ Safety ” , page 9.
2. Check if all installation requirements are fulfilled such as:
• the environmental conditions of the installation area,
• the electrical facilities,
• cooling requirements,
• the capabilities of the supporting structure (table/ceiling)
• etc ... for more info see chapter “ Installation requirements ” , page 26.
3. Unpack the projector or pull out the projector from its flight case. See chapter “ Unpacking the projector ” ,
page 28 or see chapter “ Flight case ” , page 184.
4. In case of a first install perform an initial inspection of the projector. See chapter “ Initial inspection ” .
5. Define the installation position of the projector. For detailed info and possibilities see chapters:
• “ Projector orientations ” , page 31.
• “ Projector positioning ” , page 33.
• “ Projector shift and tilt range ” , page 34.
6. Select the lens that will best fit for the application. See chapter “ Lens selection ” , page 36, and “ Available
lenses ” , page 37.
Installation process