Barco Njord, Installation Manual

Page: 92 / 232

R5913593 /01 Njord 92
7.7 Pulse Quad Combo input Mk I
Overview Quad Combo input Mk I
SEL SEL SEL SEL SEL SEL SEL
SDI IN SDI IN/OUT
SEL
SYNC
A
SYNC
B
SYNC
C
SYNC
D
DP HDMI
SYNC
HDBT 1
SYNC
HDBT 2 SYNC SYNC
1 2 3 4 5 6 7 8
Image 7 – 8
1 Quad SDI channel A: 3G input
2 Quad SDI channel B: 3G input
3 Quad SDI channel C: 3G input
4 Quad SDI channel D: 3G input
5 DisplayPort Input
6 HDMI input
7 HDBaseT input 1
8 HDBaseT input 2
LED behavior
• The SYNC LED lit up ORANGE when valid input sync is detected.
• The SEL LED lit up GREEN when the input is selected.
For specifications about the supported inputs for SDI, HDMI, HDBaseT and DisplayPort 1.2 see
chapter
“ Input specifications ” , page 211.
Remark concerning the Mk I and Mk II inputs boards
The Mk I input board miss functionality that has been implemented on the Mk II input board. These missing
features include:
• Loop-through functionality
• 12G SDI support
• Network connectivity on HDBaseT inputs
The projector is now standard equipped with the Mk I input board. For details and specifications see chapter
“ Pulse Quad Combo input Mk II ” , page 90.
Visual difference between the Mk I and Mk II input boards
There is one real visual aid to tell the two variants apart. There are visual markings added on the Mk II input
board, marking which connector supports 12G and which only supports 3G.
SEL SEL SEL SEL
SDI IN SDI IN/OUT
SYNC
A
SYNC
B
SYNC
C
SYNC
D
1
Image 7 – 9 Quad Combo Input Mk I board, without markings above
the SDI inputs
C D
SEL SEL SEL SEL
SDI IN SDI IN/OUT
A B
SYNC SYNC SYNC SYNC
3G/12G 3G 3G 3G
2
Image 7 – 10 Quad Combo Input Mk II board, with 3G/12G markings
above the SDI inputs/outputs.
Input & Communication