16
Nio
Connecting the signal cables
T
O
CONNECT
THE
SIGNAL
CABLES
TO
THE
DISPLAY
:
To get access to the connectors, remove the connector compartment
cover by pulling down the 2 clips at the top of the cover.
The location of the connectors depends on the display type:
Figure 10: Inputs E-3620, MDNG-5121
Figure 11: Inputs MDNC-3121, MDNG-2121 and MDNG-6121
Figure 12: Inputs MDNC-2121
•
Connect one end of the DVI/DisplayPort cable to the DVI/
DisplayPort input of the display (1). Connect the other end of the
DVI/DisplayPort cable to the DVI/DisplayPort connector of the
display controller board.
•
Connect a PC USB downstream connector to the display’s USB
upstream connector by means of a USB cable (2).
•
Connect any USB device to one of the display’s USB downstream
connectors (3)
•
Connect the DC power input (4) of the display to the external DC
power supply. Connect the other end of the external DC power
supply to a
grounded
power outlet by means of the proper power
cord delivered in the packaging.
1
2
3
4
1
2 3
4
1
2 3 4
