18
Nio
3
Slide the cover upward while moving the lower side of the cover
towards the foot.
4
Press the cover to the foot so that it makes a clicking sound.
VESA-mount installation
The panel, standard attached to the tilt & swivel foot, is compatible with
the VESA 100 mm standard. So it can be used with an arm stand
according to the VESA 100 mm standard.
Therefore, the tilt & swivel foot must be removed from the panel..
T
O
ATTACH
THE
DISPLAY
TO
AN
ARM
STAND
:
1
Put the display face down on a clean and soft surface. Be careful
not to damage the panel screen.
2
Remove the tilt & swivel foot cover.
•
Use an arm that is approved by VESA (according to the
VESA 100 mm standard).
•
Use an arm that can support a weight of at least 13 kg
(28.66 lbs).
Never move a display attached to an arm by pulling or pushing
the display itself. Instead, make sure that the arm is equipped
with a VESA approved handle and use this to move the display.
Please refer to the instruction manual of the arm for more
information and instructions.
WARNING
