33
K5902142 /07
Nio 5.8MP Gray
separate channels. Switching between channel 1 and channel 2 can in its turn be done automatically or
manually:
-
Automatic channel selection will automatically detect the connected video input(s) and show it on the
screen. Priority will be given to channel 1 inputs if both channels have video input(s) connected. In this
way channel 2 can be seen as a backup channel.
-
Manual channel selection allows to manually switch to either channel 1, channel 2 or no channel
(causing no input to be displayed).
For each channel, the video input (DisplayPort or DVI) can then also be selected automatically or
manually:
-
Automatic input selection gives priority to DisplayPort over DVI for each channel.
-
Manual input selection allows DisplayPort or DVI to be selected manually per channel.
To automatically detect the image source:
1.
Bring up the OSD main menu.
2.
Navigate to the
Configuration > Image Sources
menu.
3.
Enter the
Image Source Selection
submenu and select
Automatic
.
To manually select an image source:
1.
Bring up the OSD main menu.
2.
Navigate to the
Configuration > Image Sources
menu.
3.
Enter the
Image Source Selection
submenu and select
One Image Source
.
4.
Enter the
Image Source
submenu and select one of the image sources.
To enable expert mode (dual input channel mechanism):
1.
Bring up the OSD main menu.
2.
Navigate to the
Configuration > Image Sources
menu.
3.
Enter the
Image Source Selection
submenu and select
Expert
.
To automatically switch between the input channels:
1.
Bring up the OSD main menu.
2.
Navigate to the
Configuration > Image Sources
menu.
3.
Enter the
Image Source Selection
submenu and select
Expert
.
4.
Enter the
Automatic Selection of Input
submenu and select
Enabled
.
To manually switch between the input channels:
1.
Bring up the OSD main menu.
2.
Navigate to the
Configuration > Image Sources
menu.
3.
Enter the
Image Source Selection
submenu and select
Expert
.
4.
Enter the
Automatic Selection of Input
submenu and select
Disabled
.
5.
Enter the
Left
submenu and select one of the input channels.
To select the image source on channel 1 and 2:
1.
Bring up the OSD main menu.
2.
Navigate to the
Configuration > Image Sources
menu.
3.
Enter the
Image Source Selection
submenu and select
Expert
.
4.
Enter the
Input 1
or
Input 2 Image Source
submenu and select one of the image sources.
Summary of Contents for Nio 5.8MP Gray
