STEP3: Connecting the components
9
5
STEP3: Connecting the components
5.1
Cabling and connections
Figure 3: Connections at rear side
Make the following connections
1. Connect a control screen to the VGA output connector (see 1 on the figure above)
2. Connect the USB Keyboard and Mouse into vacant USB connectors (see 2 on the figure above).
3. Connect your network to Ethernet port 1 (see 3 on the figure above)
4. Connect the power cable (see 4 on the figure above)
NOTE
:
The keyboard and mouse can also be plugged into USB connectors on the front side of the unit.
1
VGA output connection for control screen
2
4 USB ports (keyboard and mouse)
3
2 Ethernet ports (port 1: left, port 2: right) for network connection
4
Power connection
4
3
1
2
