10
STEP4: Switching on the system and Setup
6
STEP4: Switching on the system and Setup
6.1
Switching On and Setup
Figure 4: Power On the unit
1
Power On the unit by pressing the Power Switch (see 1 on the figure below).
2. Insert the MGS software CDROM (R33044100) in the CDROM drive (see 1 on the figure below)
as soon as the unit is powered on.
3
The Setup procedure starts automatically and takes approximately 15 minutes.
When the setup is finished, the CDROM drive opens and the system reboots auto-
matically.
1
Power Switch
2
CDROM drive
2
1
