5. Maintenance
Barco – NGC-105 – R59770204 – Revision 00 – June 2008
______________________________________________________________________________________________________
5-2
5.1
Replacing power modules
The power modules are hot-swappable. They are located behind the front flap. The two slots for power modules
are located on the upper part on the front of the NGC-105. There is a labeling next to each slot
PSU1
and
PSU2
,
indicating the number of the slot, please see the figure below:
PSU1
PSU2
Figure 5-1
Location and numbering of the slots for power modules
The NGC-105 can get equipped with one power module for non-redundant operation or with two power supplies
for redundant operation.
In non-redundant operation it is recommended to use
PSU1
for the power module. This enables self-evident
cabling, even though from technical point of view both slots are equivalent.
Summary of Contents for NGC-105
Page 1: ...User s manual NGC 105...
