5. Maintenance
Barco – NGC-105 – R59770204 – Revision 00 – June 2008
______________________________________________________________________________________________________
5-6
5.2.2
Exchanging the defective fan module
•
Loosen the knurl screw [1] of the defective fan module (Picture 1 below)!
•
Remove the fan module by pulling at the handle [2] (Picture 2 below)!
•
Take a new fan module out of its packaging!
•
Take care of the orientation of the fan module!
Fan module 1 must be rotated until knurl screw and handle are on the upper part of the fan module.
Fan module 2 must be rotated until knurl screw and handle are on the lower part of the fan module.
•
Push the fan module carefully into the slot until the front sheet of the fan touches the sheet of the housing!
•
Fasten the knurl screw until it is tightened.
1.
2.
Figure 5-4
Two steps to exchange a fan module
Summary of Contents for NGC-105
Page 1: ...User s manual NGC 105...
