4. Operating
Barco – NGC-105 – R59770204 – Revision 00 – June 2008
______________________________________________________________________________________________________
4-2
4.1
Switching on and off
The NGC-105 is set up, configured and connected to the mains connection at your site by trained service person-
nel.
Switching on
Switch the power switch on the front of NGC-105 to the
I
position to switch the device on; please refer to
Figure
3-1 Front view of NGC-105
.
The fans start spinning and the NGS boards start booting. They require only short time to boot and initialize, as
soon as they are operable the status LED [L1] on each board shines permanently green.
Switching off
Switch the power switch on the front of NGC-105 to the
O
position to switch the device off; please refer to
Figure
3-1 Front view of NGC-105
.
Summary of Contents for NGC-105
Page 1: ...User s manual NGC 105...
