System manual MeDis 5MP1HM
47
If DualView is not enabled, you will see a single virtual screen in
the display properties dialog for both heads of a BarcoMed Display
Controller. If DualView is enabled, you will see a two virtual
screens in the dialog box on the Settings Tab of the Display
Properties Control Panel, one for each head of the BarcoMed
Display Controller.
If you wish to enable DualView simply click
Next
to continue.
If
you do not wish to enable DualView
clear
the checkbox next to
Enable the DualView device?, and click
Next
to continue.
13. The
Device Confirmation
screen displays the device driver that
will be installed. If you want to change your selection, click
Back
to return to the Device Selection Screen. Click
Next
to begin
installing the driver. Click
Cancel
to abort the driver installation.
Special Note:
Once you click
Next,
you cannot cancel the driver
installation.
14. Prior to beginning the installation the BarcoMed Driver Install
Wizard will warn you that while the driver is being installed your
display may flicker. Click
OK
to continue.
15. When the screen shown in figure 27below appears, click
Continue Anyway
. This screen may appear multiple times.
Figure 21
17. When the Wizard tells you that it has successfully installed the
selected driver, click
Finish
. The wizard will now begin installing
the next selected piece of BarcoMed Software. If you are working
with the default selections, this will be the BARCO DPMS
InstallShield Wizard. Please turn to the section,
BARCO DPMS
Screen Saver Installation
.
BarcoMed driver and software installation
Summary of Contents for MeDis 5MP1HM
