Barco MDSC-8527, User Manual

Page: 33 / 64

33 R5914634 /01 MDSC-8527
4.3.6 Picture-by-Picture (PBP)
About Picture-by-Picture
This function allows the display to show a second input source on the right side of the display. The Primary
input (main source) is still displayed on the left half of the screen.
The possible Picture-by-Picture combinations between the Primary input (main source) and the Secondary
input (PBP image) is displayed in the following table.
Primary
input
Secondary input
DP 1.2 SST HDMI-1 HDMI-2 DVI 3G-SDI 4K-SDI (**)
DP 1.2 SST
(*) No Yes Yes Yes Yes Yes
HDMI-1 Yes No Yes Yes Yes Yes
HDMI-2 Yes Yes No Yes Yes No
DVI Yes Yes Yes No Yes Yes
3G-SDI Yes Yes Yes Yes No Yes
4K-SDI (**) Yes Yes No Yes Yes No
(*) No PBP with DP 1.2 MST
(**) MDSC-8527 12GP version
Primary input up to 4K resized to half screen on left side. Secondary input up to 4K resized to half
screen on right side.
The Video Parameters applied to the Primary input Source are also applied to the Secondary input.
The 2nd source keeps the same image size (Native/Aspect) as the Primary input Source.
To select Picture-by-Picture input
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the PbP Input submenu.
4. Select the value for each of the following options:
- PBP Mode (ON / OFF)
- PBP Source (select input)
- PBP Swap (ON / OFF)
4.3.7 Picture-in-Picture (PIP)
About Picture-in-Picture
This function allows the display to show a second input source as an inset window inside the main source.
The possible Picture-in-Picture combinations between the Primary input (main source) and the Secondary
input (PiP image) is displayed in the following table.
Advanced operation