Barco MDSC-8527, User Manual

Page: 20 / 64

R5914634 /01 MDSC-8527 20
3.1 On/off switching
The procedures below consider that DC power is supplied to the display. Please check the status of
the power mode LED to verify that your display is supplied with DC power (see
“Power status LED ”,
page 21 ).
When the DC power is supplied to the display, all LEDs of the front keyboard will turn on for 1
second. After this, the front keyboard calibration is performed (all white LEDs will turn off and the
central LED will turn orange).
Do not touch the front keyboard during calibration (less than 4 seconds). When the calibration is
complete, the front keyboard is available and can be used (the central LED will turn steady green or
blinking green / orange).
To switch on your display
With the front keyboard:
1. Press and hold (3-4 seconds) the key until the entire front keyboard starts blinking.
2. While the front keyboard is blinking, release the key again (within 2 seconds, to avoid a keyboard re-
lock) and the display will switch on.
With the rear keyboard:
1. Press and hold (3-4 seconds) the center button until the entire front keyboard starts blinking..
2. While the front keyboard is blinking, release the center button again (within 2 seconds, to avoid a
keyboard re-lock) and the display will switch on.
When the keyboard backlight lights up, the power mode LED will turn full green indicating that the
display is switching on and the logo will be visible for a few seconds.
To switch off your display
With the front keyboard:
1. Unlock the front keyboard (see “Front keyboard locking/unlocking”, page 20 ).
2. With the keyboard unlocked, press and hold (3-4 seconds) the key until the entire keyboard starts
blinking.
3. While the front keyboard is blinking, release the key again (within 2 seconds) and the display will switch
off.
With the rear keyboard:
1. Press and hold (3-4 seconds) the center button until the entire front keyboard starts blinking.
2. While the front keyboard is blinking, release the center button again (within 2 seconds) and the display will
switch off.
3.2 Front keyboard locking/unlocking
About
In order to avoid unwanted or accidental activation of the front keyboard, a lock/unlock mechanism has been
implemented. This means that the front keyboard needs to be unlocked before it can be used to change any of
the display settings. By default, all keys except the
key will be dimmed to indicate that the front keyboard is
locked.
After unlocking the front keyboard, all keys will light up. Touching any of these keys while the backlight is on
will execute the function of the key. However, if no further action is taken within the time defined by the OSD
time-out parameter, the keys will dim again and the keyboard will re-lock.
Daily operation