Barco MDSC-8358 RL, User Manual

Page: 9 / 45

2. Parts, controls and connectors
1. Additional protective earth pin
2. Input power connector
3. RS-232 connector
4. Switch (between RS-232 & Ethernet)
5. Ethernet connector for monitor remote control
6. DVI-D single link / dual link connector (*)
7. +5V out connector
8. DisplayPort connector
9. DVI splitter output connector
10. DVI splitter input connector
(*) 4 DVI connectors, numbered from 1 to 4 from right to left; all connectors must be installed when in SL
mode; DVIs 1 & 3 or 2 & 4 must be installed when in DL mode.
The 5V connections are available with the speci fi c purpose to power an external DVI
extender.
No other uses of the +5V are allowed.
Every +5Vout connector is connected with the nearest jack, but every pair is indepen-
dent (500mA max).
If a DVI pair is disabled, then there is no power on the connector and the jack, connected
to the DVI connector.
2.4 Connector pin assignments
2.4.1 DVI–D single link / dual link connector
Overview
Image 2-4
Pin Function
1 D2_Rx- (T.M.D.S.)
2 D2_Rx+ (T.M.D.S.)
3 GND (data 2 shield)
4 D4_RX- (T.M.D.S.)
5 D4_RX+ (T.M.D.S.)
6 SCL (for DDC)
7 SDA (for DDC)
8 N.C.
9 D1_Rx- (T.M.D.S.)
10 D1_Rx+ (T.M.D.S.)
11 GND (data 1 shield)
12 D3_RX- (T.M.D.S.)
(451920612552) K5902150 MDSC-8358 28/11/2017 7