5. Advanced operation
5.7
Input channel selection
Overview
•
•
5.7.1
Input channel menu
About input channel menu
Possibility to select the following inputs:
•
DISPLAYPORT
•
DISPLAYPORT FAILOVER
•
DVI 1
•
DVI 2
•
DVI 3
•
DVI 4
•
4 DVI Single Link
•
2 DVI Dual Link
To select an input
1. Bring up the OSD main menu.
2. Navigate to the
Input
menu.
3. Enter the
Input
submenu.
4. Select one of the available inputs and con
fi
rm.
5.7.2
Failover input
About failover input
This function allows the display to automatically switch to a failover (backup) source in case the Display-
Port input main source is missing. The display will automatically restore the main source once the signal
is back.
The available failover inputs for your display are:
•
DVI1
•
DVI3
The failover input will be activated within about 1 second after the main input (Display-
Port) has been lost.
During the transition from main to failover input and vice versa, a text message is visible
to inform the user.
The main source can be changed while the failover input remains unchanged. During the
selection and synchronization of a new main source the failover function is temporary
(7 sec) disabled.
(451920612552) K5902150 MDSC-8358 28/11/2017
21
Summary of Contents for MDSC-8358 RL
Page 4: ...Table of contents 2 451920612552 K5902150 MDSC 8358 28 11 2017 ...
Page 20: ...4 Daily operation 18 451920612552 K5902150 MDSC 8358 28 11 2017 ...
Page 26: ...5 Advanced operation 24 451920612552 K5902150 MDSC 8358 28 11 2017 ...
Page 42: ...6 Important information 40 451920612552 K5902150 MDSC 8358 28 11 2017 ...