Barco MDSC-2324 DDI, User Manual

Page: 51 / 78

K5903252 (451920612633) /02 MDSC-2324
51
5.4.2 Language
About languages
The available languages for your display OSD menu are:
• English
• Français
• Deutsch
• Español
• Italiano
To select the language
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Language submenu.
4. Select one of the available languages and confirm.
5.4.3 Failover mode
About failover mode
This function allows the automatic switch to a defined Backup source when the Main input signal is missing.
The display will automatically restore the Main input as soon as the signal is back.
The Backup source is the input selected as “ 2nd Picture Source ” with “ 2nd Picture Mode ” = “ Off ” .
This Main & Backup combination is stored at the moment the function “ Failover mode ” is set to “ Enabled ” .
Failover Mode is not selectable when either the Main Source or the 2nd Picture Source is set to “ Autosearch ” .
Failover mode is automatically disabled when either the Main Source or the 2nd Picture Source is
changed. A warning message
“ Failover off ” appears on the screen for a few seconds.
Returning to the original Main & Backup combination will automatically re-enable the Failover
feature.
For the MNA version only, Failover mode will be activated up to 12 seconds after the Nexxis signal
becomes unavailable (delay required to allow a Nexxis layout change).
To enable/disable failover mode
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Failover mode submenu.
4. Enable/Disable failover mode as desired and confirm.
5.4.4 Extended keyboard
About the extended keyboard
The concept of the extended keyboard is to present a large selection of functions immediately available to the
user without the need to navigate through the OSD Menu.
Once enabled, by simply pressing one of the first 3 keys on the left the user is presented with a list of new
selections displayed on screen; the new choices can be selected by using each of the key just below the OSD
text.
If two options are available for one key, the first key press will select the upper option, a second press selects
the lower option.
Advanced operation