Barco MDCC-4230 User Manual Download Page 50

Page: 50 / 55

8. Important information

Indicates the device is approved according to the CCC regulations

Indicates the device is approved according to the VCCI regulations

Indicates the device is approved according to the KC regulations

Indicates the device is approved according to the BSMI regulations

Indicates the device is approved according to the PSE regulations

Indicates the USB connectors on the device

Indicates the DisplayPort connectors on the device

Indicates the manufacturing date

Indicates the temperature limitations

for the device to safely operate within specs

Indicates the device serial no.

Warning

: dangerous voltage

Caution

Consult the operating instructions

Indicates this device must not be thrown in the trash but must be recycled,
according to the European WEEE (Waste Electrical and Electronic Equipment)
directive

Indicates Direct Current (DC)

Indicates Alternating Current (AC)

6. Values for xx and yy can be found in the technical specifications paragraph.

K5902056 CORONIS FUSION 4MP / 6MP 31/10/2014

Summary of Contents for MDCC-4230
























































Search results

Summary of Contents for MDCC-4230

Reviews:

Related manuals for MDCC-4230

Brands by name

Popular brands

Barco MDCC-4230, User Manual

Search results

Summary of Contents for MDCC-4230

Reviews:

Related manuals for MDCC-4230

Brands by name

Popular brands