Barco MDCC-4230, User Manual

Page: 27 / 55

5. Advanced operation
To change the color coordinates:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Calibration > Color Settings menu.
3. Enter the Color De fi nition submenu.
4. Select Color Coordinates and con fi rm.
5. Enter the x and/or y submenu.
6. Set the coordinate value for x and/or y as desired and con fi rm.
5.12 Viewing modes
About viewing modes
The Coronis Fusion 4MP / 6MP can be used in two viewing modes:
Diagnostic This mode provides the full calibrated luminance
and is intended for using the display for diagnostic
purposes.
Text In this mode, the luminance is reduced to
approximately half of the luminance. This
is intended for using the display with of
fi ce
applications such as word processing.
Please note that text mode is not persistent, once
powered off, the unit will restart in diagnostic mode.
To quickly switch the viewing mode without having to enter the OSD menu, touch the
left and right key (the two leftmost buttons) at the same time during normal operation.
As the Coronis Fusion 4MP / 6MP is intended to be used in a diagnostic environment,
the diagnostic mode should always be selected.
To select a viewing mode:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Calibration menu.
3. Enter the Viewing Mode submenu.
4. Select Diagnostic/Text as desired and con fi rm.
5.13 Display functions
About display functions
Native, uncorrected panels will display all grayscale/color levels with luminance increments that are not
optimal for crucial diagnostic information. Studies have shown however, that in medical images certain
grayscale/color parts contain more diagnostic information then others. To respond to these conclusions,
display functions have been de
fi ned. These functions emphasize on these parts containing crucial diag-
nostic information by correcting the native panel behavior.
K5902056 CORONIS FUSION 4MP / 6MP 31/10/2014 25