11. Interfaces
11.5
USB connector
1
+5V power
2
Differential Data line
3
Differential Data line
4
GND
11.6
OPSconnector
The standard 80 pin connector carries following signals:
•
1 HDMI interface with pixel clock up-to 300MHz
•
+12V Power (Output) to the Pluggable Module.
•
1 USB 2.0 differential Signals
•
1 UART interface
•
Power Status Signal (Input) Power Good status of the pluggable board
•
Pluggable Signal On(output) To Power ON or boot up the Pluggable Module
•
Pluggable board detection (Input) signal
Pin No. Signal
Description
I/O
1
DDP_3N
DisplayPort (NC)
IN
2
DDP_3P
DisplayPort (NC)
IN
3
GND
Ground
4
DDP_2N
DisplayPort (NC)
IN
5
DDP_2P
DisplayPort (NC)
IN
6
GND
Ground
7
DDP_1N
DisplayPort (NC)
IN
8
DDP_1P
DisplayPort (NC)
IN
9
GND
Ground
10
DDP_0N
DisplayPort (NC)
IN
11
DDP_0P
DisplayPort (NC)
IN
12
GND
Ground
13
DDP_AUXN
DisplayPort (NC)
I/O
Barco - KVD5521, IVD5521, HVD5521 - R591341 - User Manual - Revision 05 - November 2016
_______________________________________________________
73
